Basically fatto goes back 2 MR2 - Page 25

lollersk8s · 10-15-2013, 08:55 PM

Quote:

Originally Posted by GhEttOrAiD

Vinyl wrap project called off. Despite still having to use the shitty two layer satin red, friend said "this sun is perfect we should wrap your car today" so I went home grabbed the vinyl primer and squeegee he requested I buy... I remove my engine lid, pull my side view mirrors off... Then 1/4 of the way through wrapping my engine lid he says "not gonna be able to finish your doors today too man"

okay so I reinstalled my mirrors...

then 20 minutes later while cutting and wrapping the vinyl into the vents on my engine lid he says "I can't do this right now it looks like shit you're going to see cut marks"

I see one of the vents has visible black around the inner edge... But the one right next to it looks absolutely perfect so i offer "just do the rest of em like this"

"I'll do it tomorrow man just put the lid back on (with 80% of the airflow blocked by fucking vinyl) I say "this is obviously too difficult for you to do properly so I'll just get it painted"

then it becomes "I can't spend my whole saturday cutting out vents" (the guy doesn't have a fucking job so every day is essentially saturday

) then he walks over and starts wrapping one of the engine side covers instead...

Told him to stop wrapping and to help me pull all vinyl off of the car.

Then he starts saying "I'll plastidip your car dood it'll look hella good," I counter with "you can't get the good stuff in kkkalifornia because of

OMGOMGOMGOMGOMGOMG jerry brown" "Ya sure you can just go to home depot get the shit in a spray can"

Then it becomes "i'll rattlecan your car it'll be hella cheap only 60 bucks"

Nahh man I'll just pay to have it done its cool

All because this dumb bitch next door who HAS a fucking boyfriend asked him to go with her to the fucking

OMGOMGOMGOMGOMGOMG oktoberfest in

OMGOMGOMGOMGOMGOMG palo alto

bros before hos does not exist in kkkalifornia

Haha good read.

I had imagined your "vinyl wrapping friend" was something along those lines.

Ps. it's possible to win over already attached women, right? Or she could be a slut. Don't judge, you know.

bowle_EQ · 10-15-2013, 11:48 PM

lol u think you do some pimp my ride but actually you do ducttape a pile of rust+metalscraps!

GhEttOrAiD · 12:03 AM

post pics of your rickshaw then you gook bastard

GhEttOrAiD · 10-16-2013, 12:01 AM

Did I just get effed in the A by a non native english speaking spammer?

GhEttOrAiD · 10-16-2013, 12:02 AM

+ YouTube Video

grjr · 10-16-2013, 03:03 AM

Quote:

Originally Posted by bowle_EQ

lol u think you do some pimp my ride but actually you do ducttape a pile of rust+metalscraps!

lollersk8s · 10-16-2013, 12:50 PM

Hoe daaaaang son

You let him talk like that?

Typhoon43 · 10-16-2013, 01:42 PM

Quote:

Originally Posted by GhEttOrAiD

Did I just get effed in the A by a non native english speaking spammer?

Not with that UID... Guys is legit, and seems to have come back years later JUST to make fun of your modding prowess... or lack there of.

GhEttOrAiD · 03:04 PM

ECU arrived. No CEL's AT ALL. Idle is an appropriate 1k rpm (instead of 2k.) Little backfiring and I'm betting that eventually I'll get the no speedo CEL but that's basically inconsequential.

<edit> Don't really feel any power gain. I'm thinking the swapper must have added used a MBC. I noticed what looks like a boost control solenoid dangling near my fuse panel. Need to track it down, get my boost gauge installed ASAP.

GhEttOrAiD · 10-18-2013, 01:49 PM

Yeah.

That rattle I've been trying to track down?

YouTube footage, facebook post, forum posts, bought intercooler mounting bracketry, tore apart the RH side of my engine bay zip ties out the ass?

I hadn't actually checked my passenger side cubby.

mikeawesome · 10-18-2013, 02:37 PM

are those suppose to be installed on the car

DirtyZero · 10-18-2013, 02:40 PM

Quote:

Originally Posted by GhEttOrAiD

Yeah.

That rattle I've been trying to track down?

YouTube footage, facebook post, forum posts, bought intercooler mounting bracketry, tore apart the RH side of my engine bay zip ties out the ass?

I hadn't actually checked my passenger side cubby.

GhEttOrAiD · 10-18-2013, 02:59 PM

Quote:

Originally Posted by mikeawesome

are those suppose to be installed on the car

Not actually sure what they are exactly.

GhEttOrAiD · 10-19-2013, 12:51 AM

Thinking they're frunk lid hinges which arent being used for whatever reason... Could be that the CF hood is incompatible with them.

GhEttOrAiD · 10-19-2013, 08:40 PM

amplifier reinstalled new speaker wires run shitty crimping of wires behind head unit redone... Only paid for a "diagnosis" and an hour of labor the guy spent almost three...

Definitely going to recommend this shop in the future. Sounds excellent. Had been listening to only one tweeter ever since I tore out the amp like a

.. =X

http://www.pacificstereoredwoodcity.com/

GhEttOrAiD <--- EVOM	post pics of your rickshaw then you gook bastard __________________ [QUOTE=BlisterDick;25482810][b]PLZ keep door unlock for roach and spider[/b][/QUOTE] ✓, ✓, ☑, ☐ Last edited by GhEttOrAiD; 10-16-2013 at 12:03 AM..
10-15-2013, 11:49 PM	#363

GhEttOrAiD <--- EVOM	Did I just get effed in the A by a non native english speaking spammer? __________________ [QUOTE=BlisterDick;25482810][b]PLZ keep door unlock for roach and spider[/b][/QUOTE] ✓, ✓, ☑, ☐
10-16-2013, 12:01 AM	#364

lollersk8s HOLY FUCK I AM RETARDED	Hoe daaaaang son You let him talk like that? __________________ Originally Posted by she nice i do drink but it's not as effective for immediate relief
10-16-2013, 12:50 PM	#367

GhEttOrAiD <--- EVOM	Yeah. That rattle I've been trying to track down? YouTube footage, facebook post, forum posts, bought intercooler mounting bracketry, tore apart the RH side of my engine bay zip ties out the ass? I hadn't actually checked my passenger side cubby. __________________ [QUOTE=BlisterDick;25482810][b]PLZ keep door unlock for roach and spider[/b][/QUOTE] ✓, ✓, ☑, ☐
10-18-2013, 01:49 PM	#370

mikeawesome Baloneyflaps is my lord. I have asked him into my heart.	are those suppose to be installed on the car __________________ RIP Malamute
10-18-2013, 02:37 PM	#371

bowle_EQ	lol u think you do some pimp my ride but actually you do ducttape a pile of rust+metalscraps! __________________ KMFDM!!
10-15-2013, 11:48 PM	#362

GhEttOrAiD <--- EVOM	Thinking they're frunk lid hinges which arent being used for whatever reason... Could be that the CF hood is incompatible with them. __________________ [QUOTE=BlisterDick;25482810][b]PLZ keep door unlock for roach and spider[/b][/QUOTE] ✓, ✓, ☑, ☐
10-19-2013, 12:51 AM	#374